Voice Control Navigation
By using the voice control system (voice input microphone and switch), you can set the destination by giving voice commands. This enables you to use functions that are usually inoperable while driving.
By using the voice recognition trigger or voice recognition switch you can use voice commands to operate the navigation. Using the Voice Control System
When using voice commands to operate the navigation, a command list is displayed. Voice a command after the “beep”. From then on, you can give voice commands that are displayed on the command list to set the destination in the same manner.
Voice control navigation can be interrupted by touching the microphone icon on the screen. When the icon is touched, the screen background colour changes (green ↔ blue). To resume navigation voice control, touch the microphone icon again.
The differences in background colours are explained below.
Command standby screen (green):
This is the voice control command standby screen. When this screen is displayed, you can speak a command to perform navigation control. You can also perform control by directly touching the commands that are displayed on the screen.
Manual mode screen (blue):
This screen appears when voice control is interrupted. You can perform control by directly touching the commands that are displayed on the screen.
Talkback screen (yellow):
This screen appears while the talkback voice is being played when a command is recognized.
Command recognition failed screen (red):
This screen appears when command recognition failed.
