Control Names and Operations
You can operate this receiver by pressing the buttons (panel buttons) or by touching the switches displayed on the screen (touch switches).
Panel buttons
Press each panel button to operate it.
| TILT/EJECT button | Press to display the TILT·EJECT screen. |
| AUDIO button | Press to use the audio or info. Press for 1 second or more to adjust the picture quality or screen brightness. |
| MAP button | Press to display the navigation screen. |
| VOL button | Press to adjust volume of audio. |
Touch switches
Touch a switch on the screen to operate it.
Touch the touch switches with your finger.
Operating touch switches with the point of hard objects such as ballpoint pens or mechanical pencils may damage the screen.
About touch switch operations
Keep touching the touch switch until a “beep” is emitted in response. (When the guide tone is set to ON.)
To protect the screen, touch the touch switch lightly with your finger.
When there is no response from the switch, remove your finger from the screen and touch it again.
Touch switches that cannot be operated have their colours toned down.
When the switch function is enabled, the touch switch returns to a brighter colour.
