Using the Voice Control System
When the voice control system is activated, you may speak the controls displayed on the screen, or you may touch the corresponding button.
For the following instructions found in this manual, we will use “000” as a placeholder for the command text available on your actual system. “000” is only for demonstration purposes.
Press the voice recognition button.
The screen changes to the Main Menu.
:
“○○○” or touch the switch.
:
Operate by saying “○○○”.
After the “Voice command please.” voice guidance, a “beep” sounds.
Say the operation command.
After you hear the “beep”, speak or operate the screen while a “recognition mark (green-faced icon)” is displayed (within approx. 8 seconds).
If you said the wrong command or the recognition result is incorrect, cancel the operation by saying “Cancel” after the talkback voice finishes playing.
When the voice recognition button is pressed while guidance voice, talkback voice or help voice is being played, you can skip the voice guidance.
When you say “Help” while the Main Menu is displayed, a list of the currently usable commands appears on the screen.
A caution display appears after pressing the voice recognition button (External microphone/Steering Wheel Switch) while a Bluetooth device, USB device or iPod is connected, and the stored data is being read. Be sure to start the operation after the caution display disappears.
