The [VOL] knob can be switched to other functions. When the rotary mode is set to ON, you can switch from the volume adjustment function to the following functions by pressing the [VOL] knob.
Source | Function | Page |
---|---|---|
FM/AM | TUNE UP/DOWN | Tuning to a station |
XM | Channel Up/Down | Operations during rotary mode |
SIRIUS | Channel Up/Down | Operations during rotary mode |
CDP/CDC | Track Up/Down | TRACK (FILE) UP/DOWN |
MP3/WMA | - File search- Folder search | TRACK (FILE) UP/DOWN |
USB | - File search- Folder search | TRACK (FILE) UP/DOWN |
iPod | Track search | Advancing to the next music file or returning to the beginning of the music file being played |
For detailed information on the above functions, refer to the operation instructions for each related audio source.
Press the [MODE/TAG] button while the main unit is set to any audio mode.
Rotary mode will switch ON. When rotary mode is set to ON, the rotary indicator will be displayed as follows.
If the [MODE/TAG] button is pressed again, or if no operations are performed for more than 10 seconds, the rotary mode will be cancelled.