Fujitsu Ten ECLIPSE OWNER'S MANUAL / CD3200
Press the [RTN] button for less than one second to switch to the desired XM band.
The radio bands will switch from XM1 →XM2→XM3→ XM4 in order each time the button is pressed.
Press the [SELECT] (Right/Left) button to tune to a channel.
Right:
Selects
a higher channel.
Left:
Selects
a lower channel.
Press the [SELECT] (Right/Left) button for more than one second to start an automatic channel search.
Reception is enabled for all channels within the currently selected category.
(Category selection for details on “Category selection”.)
Right:
Starts
searching for higher channels.
Left:
Starts
searching for lower channels.
Turn the [VOL] button to the left or right.
Turn to
the right:
Tunes to higher channels.
Turn to
the left:
Tunes to lower channels.
The channel can be selected from among categories such as ROCK and DANCE.
Consult the XM website for the details of the categories.
Press the [SELECT] (Up/Down) button for less than one second.
The category will switch in the order shown below each time button is pressed.
Up:
Advances
to the next category.
Down:
Returns
to the previous category.