Print this page

Function Mode

Switching demonstration screen display (Demo)

Demonstration screen display settings can be performed. Default setting is ON.

If the demonstration screen display is set to ON, operation, motion picture, and other screens will be displayed in succession.

If you press a button while the demonstration screens are being displayed, the demonstration screens will be cancelled and the audio operation screen will be displayed. If you do not operate the status display function within 15 seconds, the display will return automatically to the demo screen.

1Press the [SELECT] (Up/Down) button to select Demo.

2Press the [ENTER] button.

The demo display setting mode is activated.

3Press the [SELECT] (Up/Down) button to select Demo ON/OFF.

  • Back
  • Next

>Page Top