Fujitsu Ten ECLIPSE OWNER'S MANUAL / CD3200
Specified frequency bands are allocated to each speaker for improved sound integration.
Press the [SELECT] (Up/Down) button to select the X-Over.
Press the [ENTER] button.
The crossover setting mode is activated.
Press the [ENTER] button to select LPF or HPF.
Each time the button is pressed, the setting item changes in the following order.
LPF*1↔ HPF*2
*1 The cut-off frequency is 80Hz.
*2 The cut-off frequency is 100Hz.
Press the [SELECT] (Up/Down) button to select Slope ON or OFF.
When it is ON, the slope is 12dB/oct.