If the Following Messages Appear

Common operations

Temperature is too high.

Restart after a few minutes.

The temperature inside the unit is abnormally high.

Wait until the temperature decreases.

Temperature is too low.

Restart after a few minutes.

The temperature inside the unit is abnormally low.

Wait until the temperature increases.

Program loading is necessary.

Please insert SD card.

The “SD memory card” containing the update program is not inserted.

Insert the “SD memory card” containing the update program.

Unable to read program.

Please check SD card or program.

Cannot read the “SD memory card” for some reason.

Check the “SD memory card”.

Installing failed.

Failed to install the software.

Install again.

No map data found.

Please insert the unit's dedicated SD card again.

The “SD memory card” containing the map data is not inserted.

Insert the “SD memory card” containing the map data.

Unable to read data.

Please check SD card.

Cannot read the “SD memory card” for some reason.

Check the “SD memory card”.

Unable to read map data.

Please check SD card.

An “SD memory card” other than the one containing the map data is inserted.

Insert the “SD memory card” containing the map data.

Map/application authorisation failed.

Please check SD card.

Failed to authorise the map or application.

Check the “SD memory card”.

Please insert a SD card.

The “SD memory card” is missing.

Insert an “SD memory card”.

In FM radio mode

List is empty

Because the station list cannot be changed.

Stop using the device for a short time and then try again.

In CD or MP3/WMA mode

Check DISC.

The disc is dirty or damaged.

The inserted disc is dirty or upside down. Check the disc for dirt and check its orientation.

If the disc is dirty, clean it. If the disc is upside down, orient it correctly. Do not use scratched or warped discs.

DISC Error.

The CD·MP3/WMA player is not operating for some reason.

Eject the disc.

Error (temperature is too high).

The temperature of the CD·MP3/WMA player is abnormally high.

Wait until the temperature decreases without performing any operations.*

No music files found.

No playable music data is recorded on the CD-R/RW disc.

Insert a CD-R/RW disc on which playable music data is recorded.

No support.

Non-supported music data is recorded, or license-controlled music data is detected.

Insert a CD-R/RW disc on which playable music data is recorded.

In USB mode

Check USB.

Playback failure or communication abnormality.

Reconnect the USB memory.

No music files found.

No playable music data is stored in the USB memory.

Connect a USB memory in which playable music data is stored.

No support files.

No supported files are stored in the USB memory.

Check the files.

Error

• Because playback stopped due to a factor in the main unit. (File access failure etc.)

• Because an over current was detected.

Stop using the device for a short time and then try again.

Authorisation Error

Player not authorised to play this video.

The files are copyright-protected. DivX files purchased with a registration code other than the code of this unit cannot be played.

Check the files.

View DivX(R) VOD Rental Rental has ** views left.

Watch movie now?

[Yes]/[No]

Displays the remaining views for the file.

Follow the instructions on the screen.

Rental Expired.

The view limit has been reached.

Connect a USB memory that contains a video file with remaining views.

This function is currently disabled.

A function was selected that cannot be used while the vehicle is in motion.

Park the vehicle and apply the parking brake.

Reading INDEX ** %

The file reading percentage display.

Do not operate until the file reading is complete.

Video framerate not supported.

The video frame rate is not supported.

Connect a USB memory in which playable video files are stored.

Video resolution not supported.

The video resolution is not supported.

Connect a USB memory in which playable video files are stored.

Audio format not supported.

No playable audio format is stored in the USB memory.

Connect a USB memory in which a playable audio format is stored.

No video files found.

No playable video files are stored in the USB memory.

Connect a USB memory in which playable video files are stored.

In iPod mode

iPod error.

Playback failure or communication abnormality.

Reconnect the iPod.

Please check the iPod firmware version.

A communication error, a playback error, the iPod software is not supported, or a control target error.

Connect a playable iPod. Reconnect the iPod.

No music files found.

No playable music data is stored in the iPod.

Connect an iPod in which playable music data is stored.

iPod authorisation failed.

Failed to authorise the iPod, or reauthorisation is required.

Reconnect the iPod.

No support video files.

Displayed when a movie is played in the video mode of iPod 5G.

Select a playable file.

No video files found.

No playable video files are stored in the iPod.

Connect an iPod in which playable video files are stored.

Searching iPod.

Please wait...

Displayed if play is not possible when the iPod source is selected.

Also displayed when waiting for skip when up/down is initially operated.

Wait for a few moments before operating.

In Bluetooth Audio mode

No music files found.

No playable music data is stored in the portable device.

Connect a portable device in which playable music data is stored.

In handsfree mode

Transfer failed.

Displayed when phonebook transfer failed.

Transfer the phonebook again.

Connection failed.

Displayed when phone connection failed.

Connect the phone again.

The part of telephone book data was not able to transfer

Displayed when call transfer was not successful.

Transfer the phonebook again.

Telephone call transferring is failed.

Displayed when call transfer was not successful.

Perform call transfer again.

Messages have not been retrieved.

Displayed when automatic message transfer failed.

Touch on the Messages screen to transfer the message.

Displayed when the phone does not support the MAP profile.

Connect a phone which supports the MAP profile before using.

The message could not be retrieved.

Displayed when message retrieval failed.

Touch to perform transfer again.

Unable to dial

Displayed when call dialling failed.

Check that the phone is connected correctly.

Unable to transfer contacts.

The Phone is in use

Displayed if the phone was in use when manual phonebook transfer was executed.

Finish using the phone before transferring the phonebook.

In picture mode

No data

No displayable image data is recorded on the SD memory card.

Insert an SD memory card on which displayable image data is recorded.

Updating failed.

Displayed when updating the Opening screen failed.

Perform Opening screen update again.

Please wait...

Displayed when image data that is 5 MB or larger is being read.

Do not operate until the data reading is complete.

In Voice Control System

Please repeat.

Displayed when the voice command could not be recognised.

Speak the command again.

Voice recognition mode has been cancelled.

Displayed when the voice recognition mode is ended.

-

That command is not available at this time.

Displayed when it is not possible to change the audio mode.

Check that the disc has been inserted correctly.

Check that the device has been connected correctly.

That command is not available at this time.

Displayed when it is not possible to change to the navigation mode.

Check that the SD card containing the map data has been inserted correctly.

Check that a language other than Russian is selected for the language setting.

If the problem is still not resolved, please contact the nearest dealer.

That command is not available at this time.

Displayed when that data does not exist.

Displayed when the voice command cannot be used.

Use the command only when the corresponding data exists.

Speak the name of the data again.

Speak a permitted voice command again.

That command is not available at this time.

Displayed when the connected device is not a supported product.

Use when a supported product is connected.

That frequency is not available.

Displayed when that frequency is not available.

Speak the command again.

There is no corresponding data.

Displayed when the corresponding data does not exist.

Use the command only when the corresponding data exists.

That channel cannot be selected.

Displayed when the requested channel data does not exist.

Use the command only when the channel data exists.

The call cannot be placed.

There is no phone number information.

Displayed when no phone number data is registered in the phonebook.

Register in the phonebook before using.

(Phonebook name) (Location) is not in the phonebook.

Displayed when the phone number data is not registered in the designated location.

Register in the phonebook before using.

The phonebook is empty.

Displayed when there is no data registered in the phonebook.

Register in the phonebook before using.

The call cannot be placed.

There is no phone number information.

Displayed when that information does not exist.

Speak the information again.

You can't add more digits.

Displayed when the maximum number of telephone number digits has been exceeded.

Make a call to the entered phone number or delete digits before entering.

There are no phones set up to make calls.

Displayed when a Bluetooth-supporting phone is not registered.

Check that a Bluetooth-supporting phone is registered.

The phone is not connected.

Please check the phone.

Displayed when a Bluetooth-supporting phone is not connected.

Check that a Bluetooth-supporting phone has been connected.

Please check the usb.

Displayed when USB is disconnected.

Check that USB is connected correctly.

Please check the ipod.

Displayed when the iPod battery is depleted.

Displayed when the iPod is disconnected.

Check the iPod battery level.

Check that the iPod is connected correctly.

Please check the phone.

Displayed when the phone is disconnected.

Displayed when the phone battery is depleted.

Displayed when the phone link is disconnected.

Check the phone battery level.

Check that the phone is connected correctly.

Loading Voice Recognition...

Displayed when voice recognition cannot yet be started.

Wait for a few moments before operating.