Loading and Unloading an SD Memory Card

Insert an SD memory card into the slot.

Loading an SD memory card

• You may not be able to open or close the display when the gearshift lever is set to P in an automatic transmission car or 1/3/5 or in a manual transmission car; or when a bottle or a similar object is placed in the cup holder. To open or close the display safely, set the gearshift lever to N (automatic transmission car) or to the Neutral position (manual transmission car) in advance, or empty the cup holder. Make sure that the car is not in motion by applying the parking brake and appropriately stepping on the foot brake in order to prevent damage or injury.

• Do not place a cup or can on the display while the display is opened. Doing so may damage the display.

• When an SD memory card is loaded, do not press or .

• Position an SD memory card with the ▲ mark at the far end and insert it until it makes a “click” sound. When it makes contact with the stopper inside, the card cannot be inserted any further. Do not try to forcibly push the card.

• Before inserting a miniSD card, microSD card, miniSDHC card or microSDHC card, be sure to attach the card to the special adapter. (If you insert only the miniSD card, microSD card, miniSDHC card or microSDHC card, you may not be able to remove it.)

1. Press .

1. Touch .

• The display will open to reveal the insertion slot.

1. Insert the SD memory card.

• Insert the SD memory card with the label on the left side.

• Make sure that the SD memory card is fully inserted.

1. After an SD memory card is inserted, touch or press the button to close the display.

• Insert the map SD card without locking it.

• If you insert an SD memory card that contains image data, you can preview the images, play a slideshow, or set an image as the Opening screen. Using the Picture Function

About SD memory cards

• This unit supports SD memory cards with capacities from 512 MB to 8 GB.

• SD memory cards that are marked as follows can be used.

	SD Logo is a trademark of SD-3C, LLC.
	SDHC Logo is a trademark of SD-3C, LLC.
	miniSD Logo is a trademark of SD-3C, LLC.
	miniSDHC Logo is a trademark of SD-3C, LLC.
	microSD Logo is a trademark of SD-3C, LLC.
	microSDHC Logo is a trademark of SD-3C, LLC.

• Multi Media Cards (MMC) cannot be used.

Unloading an SD memory card

• When unloading a SD memory card, use the following notes.

• Automatic transmission (AT) car:

• If it is difficult to unload an SD memory card when the shift lever is in the P position, shift it to the N position. (If your car has a column shift lever, shift it to the P or N position.)

• Manual transmission (MT) car:

• If it is difficult to unload an SD memory card when the shift lever is in “1”, “3”, “5” or “” position, shift it to the Neutral position.

• Take care NOT to close the display when the ejected SD memory card remains in the slot. If this caution is not observed, this receiver or the disc may be scratched.

• Do not attempt to close the front panel by hand. Doing so may damage the display.

• Do not put cups, cans, or any other objects on the display when it is open. Doing so may damage the display.

• Wipe and clean the display immediately if juice or other liquid spills onto it. If it is not cleaned, the display may be damaged.

• To protect the display from heat and dust, keep the display closed except when you load or unload an SD memory card.

1. Press .

1. Touch .

• Press in the SD memory card until you hear it “click”, let go of the card, and then pull it straight out.

1. After an SD memory card is ejected, touch or press the button to close the display.