Table Of Contents

- About Sound Adjustment Mode
- Switching the sound adjustment mode
- Circle Surround II (CSII) setting
- Parametric equalizer adjustment (PEQ)
- Selecting an equalizer mode from memory
- Measuring/displaying frequency characteristics
- Time alignment adjustment (Time Alignment)
- Crossover adjustment (X-Over)
- Multi-harmonizer settings (Harmonizer)
- Non-fader settings (Non-F Setting)
- Speaker layout settings (SP Layout)
- Importing Sound Data (Sound Data)
- Reading custom mode Data (Custom Mode)

TOP >
Sound Adjustment Mode >
Reading custom mode Data (Custom Mode)

Sound Adjustment Mode

Reading custom mode Data (Custom Mode)

Values (PEQ, time alignment and crossover setting values) can be adjusted in the custom mode on the website. Adjust the values by following the instructions provided on the E-iSERV operational procedure screen, and download the data to a CD-R or USB memory.

Press the [SELECT] (Up/Down) button to select Custom Mode.

Press the [ENTER] button.

The mode will change to the custom mode.

Insert a CD-R or connect a USB memory containing data.

Press the [SELECT] (Up/Down) button to select ON or OFF.

If there is no custom data, “NO DATA” will be displayed.

attention

PEQ, time alignment, and crossover values cannot be adjusted while the custom mode is on. To adjust values, turn the custom mode off.