-
-
-
-
-
-
-
-
-
-
-
-
-
Crossover adjustment (X-Over)
-
-
-
-
-
-
-
-
-
-
-
Sound Adjustment Mode
Crossover adjustment (X-Over)
Specified frequency bands are allocated to each speaker for improved sound integration.
Press the [SELECT] (Up/Down) button to select the X-Over.
Press the [ENTER] button.
The crossover setting mode is activated.
Press the [ENTER] button to set the crossover adjustment
channel.
Each time the button is pressed, the channel changes in the following order.
4-speaker layout:
Front → Rear → Woofer → Front →···
3-way speaker layout:
HPF → Mid-LPF → Mid-HPF → LPF → HPF →···
Press the [SELECT] (Right/Left) button to select the cut-off
frequency.
Each time the button is pressed, the frequency changes in the following order.
4-speaker layout:
Front/Rear:
63 Hz ↔ 80 Hz ↔ 100 Hz ↔ 125 Hz ↔ 160 Hz ↔ 200 Hz ↔ 250 Hz ↔ 315 Hz ↔ 400 Hz ↔ 500 Hz ↔ 630 Hz ↔ 800 Hz ↔ 1kHz ↔ 1.25kHz ↔ 1.6 kHz ↔ 2 kHz ↔ 2.5 kHz ↔ 3.15 kHz ↔ 4kHz ↔ 5kHz ↔ 6.3 kHz ↔ 8kHz ↔10 kHz
Woofer:
20 Hz ↔ 25 Hz ↔ 31.5 Hz ↔ 40 Hz ↔ 50 Hz ↔ 63 Hz ↔ 80 Hz ↔ 100 Hz ↔ 125 Hz ↔ 160Hz ↔ 200 Hz
3-way speaker layout:
M-LPF/Hi:
200 Hz ↔ 250 Hz ↔ 315 Hz ↔ 400 Hz ↔ 500 Hz ↔ 630 Hz ↔ 800 Hz ↔ 1kHz ↔ 1.25kHz ↔ 1.6 kHz ↔ 2 kHz ↔ 2.5 kHz ↔ 3.15 kHz ↔ 4kHz ↔ 5kHz ↔ 6.3 kHz ↔ 8kHz ↔ 10 kHz
M-HPF/Low:
20 Hz ↔ 25 Hz ↔ 31.5 Hz ↔ 40 Hz ↔ 50 Hz ↔ 63 Hz ↔ 80 Hz ↔ 100 Hz ↔ 125 Hz ↔ 160Hz ↔ 200 Hz
Press the [SELECT] (Up/Down) button to set the slope.
The slope can be set to “Pass”, “6dB/oct”, “12dB/oct”, “18dB/oct” or “24dB/oct”.
Up:
The slope becomes more gentle.
Down:
The slope becomes steeper.
Repeat the steps 3 to 5 to change the settings for each
channel.
