This function enables you to dial phone numbers from the main unit, or to make calls using the stored phone numbers (phonebook) and incoming/outgoing call history.
Calls can be made by dialing phone numbers from the main unit.
Before dialing a phone number directly from the main unit, set Dial Setting of the Phone Setting selection mode to ON. (For details, Enabling phone numbers to be input directly.)
Press the [/MENU] button.
Press the [MODE/TAG] button repeatedly until the "Dial Input" is displayed.
Enter numbers of 0 to 9 by pressing the [] or [] button.
[]:
Increases
the number.
[]:
Decreases the number.
Shift the cursor by pressing the [] or [] button.
[]:
Shifts
the cursor to the right.
[]:
Shifts
the cursor to the left.
Repeat the Steps 3 and 4 to input the phone number.
Press the [ENTER] button when you have input the phone number.
The input number confirmation screen appears on the display.
Press the [ENTER] button.
The input phone number is dialed.
Calls can be made using the phone numbers stored to the preset dial buttons.
Press the [/MENU] button.
Press a preset dial button between [1] and [6].
The phone number and name stored in the selected preset dial button appear on the display, and the number is dialed (two beeps will be heard if no phone number is stored).
Calls can be made using phone numbers stored in the incoming/outgoing call history of the main unit.
Press the [/MENU] button.
Press the [MODE/TAG] button repeatedly until the "Incoming Calls" is displayed. (Incoming call history) message appears on the display.
The incoming call history appears on the display.
To make a call from the outgoing call history, press the [MODE/TAG] button repeatedly until the "Outgoing Calls" is displayed.
In the History Selection mode, turn the [VOL] knob to select the number you want to call.
Press the [ENTER] button.
The phone number and name stored in the phonebook appear on the display to confirm the number to be dialed.
Press the [ENTER] button.
The phone number on the display is dialed.
A maximum of 10 outgoing and 10 incoming call records can be stored in one cell phone. If an attempt is made to store more than 10 call records, the oldest call record will be deleted.
If the battery of the vehicle is disconnected, the call history stored in the main unit will be deleted.
Calls can be made using the phone numbers stored in the phonebook of the main unit.
Press the [/MENU] button.
Press the [MODE/TAG] button repeatedly until the "Phonebook" is displayed.
In the Phonebook Selection screen, turn the [VOL] knob to select the number you want to call.
Press the [ENTER] button.
The phone number and name stored in the phonebook appear on the display to confirm the number to be dialed.
Press the [ENTER] button.
The phone number on the display is dialed.
Calls can be made using a cell phone which is connected to the main unit.
Make a call using the cell phone.
If the phone number dialed from the cell phone has been stored in the phonebook of the main unit, the name and phone number will appear on the display.
Depending on the cell phone, you may have to use the cell phone to talk even when the call has been made from the main unit.