• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
  • About the Bluetooth hands-free function
  • About the Bluetooth specifications
  • What is Bluetooth?

  • Setting the Bluetooth hands-free function

  • Displaying the Phone Setting selection mode
  • Registering a cell phone
  • Delete a registered cell phone
  • Connecting a registered cell phone
  • Disconnecting a cell phone
  • Registering phone number in the phonebook
  • Setting Auto Answer
  • Setting the ring tone
  • Setting Auto Answer for registered cell phones
  • Displaying device information for the main unit
  • Enabling phone numbers to be input directly
  • Deleting data
  • Changing the passcode
  • Switching the speech output
  • Selecting the Bluetooth hands-free mode
  • Making a call
  • Receiving a call
  • Hanging up (refusing a call)
  • Adjusting the volume
  • Storing phone numbers in preset dial
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  

• TOP >
• Bluetooth hands-free >
• Setting the Bluetooth hands-free function

Setting the Bluetooth hands-free function

A variety of settings that can be used when operating the cell phone can be made from the Bluetooth hands-free Phone Setting mode.

• Registration setting:
  To register a cell phone.

• Select Phone setting:
  To select a registered cell phone, and connect, disconnect, or delete it.

• Phone Book setting:
  To store data from the phonebook of the cell phone in the phonebook of the main unit.

• Auto Answer setting:
  To set the cell phone to Auto Answer.

• Ring tone setting:
  To set the ring tone.

• Auto Connect setting:
  To connect a registered cell phone.

• Device INFO display setting:
  To display device information for the main unit.

• Dial setting:
  To enable a phone number to be input using the main unit.

• Delete setting:
  To delete data from the incoming/outgoing call history, preset dial, or phonebook of the main unit.

• Change Code setting:
  To change the passcode.

• SP Select setting:
  To switch the front speaker for audio (speech) output.

Displaying the Phone Setting selection mode

Press the [/MENU] button for more than one second to select the Bluetooth hands-free mode.

Phone Setting selection mode is activated.

Registering a cell phone

Cell phones can be registered in the main unit. There are two methods that can be used to register a cell phone in the main unit. The cell phone itself can be used or search for cell phones using the main unit. A maximum of five cell phones can be registered in the main unit. Priority of connection will always be in sequential order from 1 to 5. As cell phones are added and deleted, the order will always go by the numbered sequence.

Registering using a cell phone

If a cell phone is currently connected, it must be disconnected prior to registration of additional cell phones.

In the Phone Setting selection mode, select "Registration" by pressing the [] or [] button.

Press the [ENTER] button.

• "NO ENTRY" will be displayed if available. If not, a double beep will be heard if the phone registration memory is not available or full.

Select "Allow Connect" by pressing the [] or [] button.

Press the [ENTER] button.

The "Waiting" message appears on the display.

Use the cell phone to select the main unit name.

The name of this unit is ECLIPSE BT.

• For details on how to operate the cell phone, read its instruction manual.

• Be sure to perform the registration of the cell phone only while the "Waiting" message is on the display.

Use the cell phone to input the passcode.

The default passcode is 1234.

• For details on how to operate the cell phone, read its instruction manual.

When the registration has been completed, "COMPLETED" will be displayed.

The cell phone has been registered.
( and appear on the display.)

If the registration has not been successfully completed, the "FAILED" message appears on the display. Repeat the registration procedure.

• To register another cell phone to the main unit, press the [/BAND] button twice after Step 7. Perform the registration procedure from the registered cell phone selection mode in Step 1.

• You cannot register an already registered phone number again.

• Both hands-free function and the audio function may be connected at the same time for some cell phones. In such a case, register the hands-free function of the cell phone first.

Searching for cell phones to be registered

In the Phone Setting selection mode, select "Registration" by pressing the [] or [] button.

Press the [ENTER] button.

"NO ENTRY" will be displayed if available. If not, a double beep will be heard if the phone registration memory is not available or full.

Select "Device Search" by pressing the [] or [] button.

Press the [ENTER] button.

"Searching" will be displayed.

• "FAILED" will be displayed if cell phone cannot be registered. Repeat Search procedure.

Select a device name of cell phone you want to register by pressing the [] or [] button.

Each time the [SCREEN/TEXT] button is pressed, the display changes in the following way, and you can register the cell phone using the device address (BD ADD) as well. Device name ↔ Device address (BD ADD) If the device name cannot be obtained during the search, "UNKNOWN" is displayed.

Press the [ENTER] button.

"Waiting" will be displayed.

Use the cell phone to input the passcode.

The default passcode is 1234.

When the registration has been completed, "COMPLETED" will be displayed.

The cell phone has been registered.
( and appear on the display.)

"FAILED" will be displayed if registration is not successful. Repeat Search procedure.

Delete a registered cell phone

In the Phone Setting selection mode, select "Select Phone" by pressing the [] or [] button.

Press the [ENTER] button.

Select the cell phone you want to delete from memory by pressing the [] or [] button.

Press the [ENTER] button.

Select "Delete" by pressing the [] or [] button.

Press the [ENTER] button.

The "DELETE ?" message appears on the display to confirm the cancellation.

Press the [ENTER] button.

"COMPLETED" will be displayed when deletion is successful.

• When a cell phone is deleted, all data associated will also be deleted (including history, preset dial, and phonebook) from the main unit.

Connecting a registered cell phone

In the Phone Setting selection mode, select "Select Phone" by pressing the [] or [] button.

Press the [ENTER] button.

Select the cell phone number you want to connect by pressing the [] or [] button.

Press the [ENTER] button.

Select "Connect" by pressing the [] or [] button.

Press the [ENTER] button.

The "Waiting" message appears on the display.

"COMPLETED" will be displayed.

The cell phone is now connected to the main unit.

( and appear on the display.)

"FAILED" will be displayed if registration is not successful. Repeat the connection procedure.

• Cell phones that have not been registered cannot be connected.

Disconnecting a cell phone

In the Phone Setting selection mode, select "Select Phone" by pressing the [] or [] button.

Press the [ENTER] button.

Select the cell phone number you want to disconnect by pressing the [] or [] button.

Press the [ENTER] button.

Select "Disconnect" by pressing the [] or [] button.

Press the [ENTER] button.

The "Disconnect ?" message appears on the display to confirm the disconnection.

Press the [ENTER] button.

"COMPLETED" will be displayed when disconnection is successful.

Registering phone number in the phonebook

Phone numbers can be registered in the phonebook of the main unit by transferring the phonebook data from the cell phone.

A maximum of 500 phone numbers can be registered for each cell phone.

In the Phone Setting selection mode, select "Phonebook" by pressing the [] or [] button.

Press the [ENTER] button.

The "DATA Receiving" message appears on the display.

Transmit phonebook data using your cell phone.

"COMPLETED" will be displayed when data transfer is successful.

"FAILED" will be displayed if data transfer is not successful. Repeat the transmit procedure.

• If there is no space remaining in the main unit for phonebook data, the "MEMORY FULL" message appears on the display when an attempt is made to transfer data from the cell phone.

• Some cell phones cannot transfer all of the phonebook data at once. In this case, transfer one data at a time.

• If the battery terminal of the vehicle is disconnected, the phonebook data registered in the main unit will be deleted.

Setting Auto Answer

When there is an incoming call, the phone can be set to answer it automatically five seconds after the phone starts ringing.

Select "Auto Answer" by pressing the [] or [] button in the Phone Setting selection mode.

Press the [ENTER] button.

Select "ON" or "OFF" by pressing the [] or [] button.

ON:
Auto Answer is activated

OFF:
Auto Answer is disabled

• The default setting for Auto Answer is OFF (Auto Answer is disabled).

Setting the ring tone

The ring tone can be set on or off for incoming calls. Ring tone is set ON by default.

In the Phone Setting selection mode, select Ringtone by pressing the [] or [] button.

Press the [ENTER] button.

Select "ON" or "OFF" by pressing the [] or [] button.

Setting Auto Answer for registered cell phones

Cell phones which have been registered to the main unit will be connected automatically, if the main unit and the Bluetooth are in an area where connection is possible.

Auto answer is set ON by default and may not be available for all cell phones.

In the Phone Setting selection mode, select "Auto Connect" by pressing the [] or [] button.

Press the [ENTER] button.

Select "ON" or "OFF" by pressing the [] or [] button.

ON :
Connects automatically.

OFF :
Must be connected manually.

Displaying device information for the main unit

The name of the device (ECLIPSE BT), the passcode (default setting - 1234), and the BD ADD (device address) can be displayed.

In the Phone Setting selection mode, select "Device INFO" by pressing the [] or [] button.

Press the [ENTER] button.

The name of the device and Passcode will be displayed.

Pressing the [SCREEN/TEXT] button will toggle between Passcode and BD ADD.

Enabling phone numbers to be input directly

The default setting is OFF.

In the Phone Setting selection mode, select "Dial Setting" by pressing the [] or [] button.

Press the [ENTER] button.

Select "ON" or "OFF" by pressing the [] or [] button.

Deleting data

Phonebook, Call History, Preset Dial, and All Data can be deleted.

• If there is no cell phone connected, the data in the phonebook cannot be deleted.

Deleting data from the phonebook

In the Phone Setting selection mode, select "Delete" by pressing the [] or [] button.

Press the [ENTER] button.

Select the "Phonebook" by pressing the [] or [] button.

Press the [ENTER] button.

Select "ALL", name, or phone number by pressing the [] or [] button.

ALL :
Deletes entire phonebook.

Name or phone number :
Only the selected data is deleted.

Press the [ENTER] button.

If ALL is selected "DELETE?" and "ALL" will be displayed.

If a name or phone number is selected "DELETE?" and the name or phone number will be displayed.

Press the [ENTER] button.

When the data in the phonebook has been deleted, "COMPLETED" will be displayed.

Deleting call history

In the Phone Setting selection mode, select "Delete" by pressing the [] or [] button.

Press the [ENTER] button.

Select "Outgoing Calls" or "Incoming Calls" by pressing the [] or [] button.

Outgoing Calls :
Outgoing call history

Incoming Calls :
Incoming call history

Press the [ENTER] button.

If Outgoing Calls is selected "DELETE?" and "Outgoing Calls" will be displayed.

If Incoming Calls is selected "DELETE?" and "Incoming Calls" will be displayed.

Press the [ENTER] button.

When the data in the call history has been deleted, "COMPLETED" will be displayed.

Deleting preset dial

In the Phone Setting selection mode, select "Delete" by pressing the [] or [] button.

Press the [ENTER] button.

Select "Preset Dial" by pressing the [] or [] button.

Press the [ENTER] button.

"DELETE?" and "Preset Dial" will be displayed.

Press the [ENTER] button.

When the data in preset dial has been deleted, "COMPLETED" will be displayed.

Deleting all data

In the Phone Setting selection mode, select "Delete" by pressing the [] or [] button.

Press the [ENTER] button.

Select "ALL" by pressing the [] or [] button.

Press the [ENTER] button.

"DELETE?" and "ALL" will be displayed.

Press the [ENTER] button.

When the data has been deleted, "COMPLETED" will be displayed.

Changing the passcode

The passcode for the main unit can be changed. 4 to 8 digits must be used. The default setting is 1234.

In the Phone Setting selection mode, select "Change Code" by pressing the [] or [] button.

Press the [ENTER] button.

Passcode and "0^*******" will be displayed.

Enter numbers of 0 to 9 by pressing the [] or [] button.

[]:
Increases the number.

[]:
Decreases the number.

Shift the cursor by pressing the [] or [] button.

[]:
Shifts the cursor to the right.

[]:
Shifts the cursor to the left.

Repeat Steps 3 and 4 to input the passcode to enter the next digit.

Press the [ENTER] button when you have input the passcode.

"NewPasscode?" will be displayed.

Press the [ENTER] button.

"COMPLETED" will be displayed.

Switching the speech output

You can switch the front speaker (between Front L, Front R, and Front LR) for output of Bluetooth hands-free speech sound.

In the Phone Setting selection mode, select "SP Select" by pressing the [] or [] button.

Press the [ENTER] button.

Select "Front L", "Front R", or "Front LR" by pressing the [] or [] button.

Front L:
Outputs sound from the front left speaker.

Front R:
Outputs sound from the front right speaker.

Front LR:
Outputs sound from both the front right and left speakers.

• The default speech output is "Front L".