A variety of functions available when using the portable device can be set from the BT Audio Set mode.
BT Audio setting:
Bluetooth
audio mode on and off.
Connection setting:
Main
unit and portable device connectivity.
Disconnection setting:
Disconnects
the main unit and the portable device.
Device INFO display:
Displays
device information for the main unit.
Press the [/MENU] button for more than one second.
The MENU selection mode is displayed.
Select the "FUNC" by pressing the [] or [] button.
Press the [ENTER] button.
Select "BT Audio Setting" by pressing the [] or [] button.
Press the [ENTER] button.
The BT Audio Setting selection mode is activated.
The Bluetooth audio function can be selected while in the audio mode.
Press the [/MENU] button for more than one second.
The MENU selection mode is displayed.
Select the "FUNC" by pressing the [] or [] button.
Press the [ENTER] button.
Select "BT Audio ON/OFF" by pressing the [] or [] button.
Press the [ENTER] button.
Select "ON" or "OFF" by pressing the [] or [] button.
ON:
Enables BT-Audio
OFF:
Disables BT-Audio
Press the [/BAND] button.
The portable device is set as a Bluetooth audio source.
The Bluetooth audio (BT-Audio) function can only be selected in the audio mode when the BT Audio Set selection mode is set to ON.
The default setting for the Bluetooth audio mode is OFF (BT-Audio selection is disabled).
In the BT Audio Setting selection mode, select "Connect" by pressing the [] or [] button.
Press the [ENTER] button.
The "Waiting" message appears on the display.
Input the passcode using the portable device.
The default passcode is 1234.
For details on how to operate the portable device, read its instruction manual.
Be sure to perform the connection of the portable device only while the "Waiting" message is on the display.
When the connection has been completed, the "COMPLETED" message appears on the display.
The
portable device is connected to the main unit.
( and appear on the display.)
If the connection has not been successfully completed, the "FAILED" message appears on the display.
If the portable device is still connected, disconnect it.
If the connection has failed and the "FAILED" message appears on the display, connect the portable device again in the BT Audio Setting selection procedure of Step 1.
The passcode is a password used when connecting the portable device to the main unit.
When the audio of the cell phone is connected, hands-free can be connected at the same time for some devices. If you want to be able to use the hands-free function, perform the hands-free connection procedure again.
In the BT Audio Setting selection mode, select "Disconnect" by pressing the [] or [] button.
Press the [ENTER] button.
The "Disconnect ?" message appears on the display.
Press the [ENTER] button.
When the disconnection has been completed, the "COMPLETED" message appears on the display.
The
main unit is disconnected from the portable device.
(The and are cleared from the display. However, will not disappear while Bluetooth hands-free
is connected.)
The name of the device (main unit), the passcode and the BD ADD (device address) can be displayed.
In the BT Audio Setting selection mode, select "Device INFO" by pressing the [] or [] button.
Press the [ENTER] button.
The name of the device and the passcode are displayed.
Press the [/BAND] button.
The BT Audio Setting selection mode will be activated again.