Adjusting the Display Angle
When the screen shines due to ambient sunlight, you can adjust the angle of the display.
When adjusting its angle, take care not to pinch your fingers. Otherwise you may hurt yourself or the display may fail.
Do not insert a disc through the upper gap when the display is tilted. Otherwise the disc or this receiver may be scratched or damaged.
When adjusting the display angle, use the following notes.
Automatic transmission (AT) car:
Adjust the display angle not to limit the driver to shift the AT lever to the “P”, “
”, or “N” position.
(If the lever shift is interfered with, do not tilt the display.)
Manual transmission (MT) car:
Adjust the display angle not to limit the driver to shift the MT lever to the “1”, “3”, “5”, or “
” position.
(If the lever shift is interfered with, do not tilt the display.)
Hold down the [
(OPEN/EJECT)] button for
1 or more seconds.
You can change the tilt angle in one step each time you press the button.
The angle can be changed in 5°, and can be tilted up to 30°.
You can open the display even when it is tilted. When you close the display, it returns to the preset angle.
If you tilt the display and turn the ignition key OFF, the display will return to the upright position. However, when you turn the ignition key to the ACC or ON position, the display returns to the preset angle.
