Table Of Contents

- How to operate the tuner
- Listening to the tuner
- Tuning to a station
- Operations during rotary mode
- Automatically storing stations into memory. (The automatic preset mode: ASM)
- Manually storing stations into memory
- Preset station scan
- Changing the reception sensitivity for automatic scanning
- Changing the radio band location

TOP >
Tuner >
Changing the radio band location

Tuner

Changing the radio band location

The location for the radio bands used between the North American region and the Asia/Australia/Latin region can be switched. The default setting is USA (North America).

attention

When an optional HD Radio tuner unit is connected, radio band location is set to USA. Other radio band locations are unavailable. (U.S.A. only)

Check that the main unit is in standby.

Press and hold button [3] and the [/MENU] button simultaneously for more than three seconds.

The radio band switches in the order shown below each time the buttons are pressed.

USA → ASIA → AUS → LATIN →USA ···

When the power is turned on, stations will be searched for automatically, and stored in buttons [1] to [6].