Fujitsu Ten ECLIPSE OWNER'S MANUAL / CD3200

• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
  • How to operate the tuner
  • Listening to the tuner

  • Tuning to a station

  • Operations during rotary mode
  • Automatically storing stations into memory. (The automatic preset mode: ASM)
  • Manually storing stations into memory
  • Preset station scan
  • Changing the reception sensitivity for automatic scanning
  • Changing the radio band location
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  

• TOP >
• Tuner >
• Tuning to a station

Tuning to a station

There are both automatic and manual methods (one of each) for storing stations in memory. The main unit can store up to 24 stations in memory. There are 6 stations for AM and 18 stations for FM (6 each for FM1, FM2 and FM3) (initial settings).

Press the [RTN/BAND] button briefly (for less than one second) to switch to the desired FM or AM band.

Radio bands will switch from FM1 → FM2 → FM3 → AM in order each time the button is pressed.

Press the [SELECT] (Right/Left) button to tune to a station.

Right:
Tunes to higher frequencies.

Left:
Tunes to lower frequencies.

Press and hold the [SELECT] (Right/Left) button. The device starts to search for stations automatically.

Right:Starts searching toward higher frequencies.

Left:Starts searching toward lower frequencies.

• At times, it may be difficult to maintain optimum reception because the antenna attached to your vehicle is constantly in motion (relative to the broadcast antenna), encountering continuous variation in the strength of the radio signals received. Other factors affecting reception include interference from natural obstacles, buildings, etc.

• When an optional HD Radio tuner unit is connected, digital broadcasts have reception priority. (U.S.A. only)