Print this page

Sound Adjustment Mode

Speaker layout settings (SP Layout)

Depending upon speaker layout, you can switch between 3-way and 4-speaker systems. (Select a system configuration before adjusting PEQ, time alignment or cross over.)

1Press the [SELECT] (Up/Down) button to select SP Layout.

2Press the [ENTER] button.

The speaker layout setting mode is activated.

3Press the [SELECT] (Up/Down) button to select 3 WAY or 4 SP+SW.

4Press the [ENTER] button for more than five seconds.

"OK?" will be displayed.

5Press the [ENTER] button for less than one second.

caution
  • When switching between 3 WAY and 4 SP+SW modes, please make sure that the volume level is set to 0.