Print this page

Sound Adjustment Mode

Non-fader settings (Non-F Setting)

  • Non-fader phase (Phase)

    The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony.

  • Non-Fader Output (Output)

    Non-Fader Output can be stereo or mono. Select the method that matches the output method for the sub-woofer system that is connected to the main unit.

1Press the [SELECT] (Up/Down) button to select NF Setting.

2Press the [ENTER] button.

The non-fader setting mode is activated.

Non-fader phase settings (Phase)

1Press the [SELECT] (Up) button to select Phase.

2Press the [SELECT] (Right/Left) button to select Reverse or Normal.

Right:
Reverse

Left:
Normal

Non-Fader Output settings (Output)

1Press the [SELECT] (Down) button to select Output.

2Press the [SELECT] (Right/Left) button to select Monaural or Stereo.

Right:
Monaural

Left:
Stereo