Tuner
Changing the radio band location
The location for the
radio bands used between the North American region and the Asia/Australia/South America (Latin)
region can be switched. The default setting is USA (North America).
Check that the main unit is in standby mode.
Press and hold button [6], then the
[BAND/ASM] button, and hold both
for more than two seconds.
The radio band switches
in the order shown below each time the buttons are pressed.
USA → LATIN → AISA→ AUS →USA ···
When the power
is turned on, the broadcast stations will be searched for automatically
and stored in buttons [1] to [6].