ECLIPSE Fujitsu Ten -
OWNER'S MANUAL / CD1200
  • TOP
Table Of Contents
  • Safety
  • Precautions
  • Names of controls and parts
  • CD/MP3/WMA/AAC player
  • USB music file player
  • Tuner
    • How to operate the tuner
    • Listening to the tuner
    • Tuning to a station
    • Automatically storing stations into memory (The automatic preset mode: ASM)
    • Manually storing stations into memory
    • Changing the reception sensitivity

    • Changing the radio band location
  • Optional remote control
  • AUDIO CONTROL
  • Function Mode
  • iPod
  • Others
  • Question
  • Specifications
  • Customer service
  • TOP >
  • Tuner >
  • Changing the reception sensitivity

Print this page

Tuner

Changing the reception sensitivity

The main unit lets you select the reception sensitivity. The two sensitivity modes available for this main unit are LOCAL mode and DX mode.

LOCAL Mode
The reception sensitivity is set to the low level so that stations with strong signals are received.
DX Mode
Because the reception sensitivity for automatic scanning is set to the high level from the start, even stations with weaker signals can be received. (Signal crossover may result in some stations being hard to hear.)

1Press the [FUNCTION] button.

The Menu Selection mode is activated.

2Press the [SELECT] button repeatedly, until DX/LOCAL mode is selected.

3Turn the [VOL] button.

The mode will switch between LOCAL mode and DX mode each time the button is turned.
The selected settings will take effect.

  • Back
  • Next

>Page Top


Copyright© 2008 Fujitsu Ten Limited All Rights Reserved.