Print this page

USB music file player

How to operate the USB music file player

A USB memory can be connected to the USB connector, music files can be played from the USB memory.

attention
  • Some digital audio players with a USB terminal may not be able to play back music files. (Not covered by warranty)

Listening to music files in USB memory

1Connect a USB memory using the USB connector.

2Switch to the USB mode.

For details, Switching Audio Modes.

3Operate the USB music file player.

The procedure for playing music is the same as that are used to play CDs. Refer to “How to operate the CD/MP3/WMA/AAC player” (page TRACK (FILE) UP/DOWN - DISPLAYING TITLE).

attention
  • If the USB mode is changed to another mode and then returned to the USB mode, the player will return to the previous file played.
caution
  • Do not disconnect the USB memory or turn the ignition key to ACC OFF position while accessing the USB memory. Doing so may corrupt the data.
  • Depending on the type connected, the USB memory may not work in some cases.
  • The USB memory does not support multi-partition. Also, it does not support USB hub.
  • It is highly recommended to back up your data in case of accidental deletion.
  • Install and use the USB device in a place that provides safe operation of the vehicle.
  • The music files under the copyright protection cannot be played.
  • When connecting a digital audio player to the USB connector, additional USB adaptors may be required.

Searching for a music file

You can retrieve your desired track in Search mode.

1Press the [BAND/ASM] button.

:

The search mode is activated.

2Press the [BAND/ASM] button to select the search mode item.

:

Search mode items are selected in the following order.
Track search → File search → Character search

For Track or File Search

 

3Turn the [VOL] button to select the track number and file number.

4Press and hold the [SELECT] button.

Playback of the selected music file will begin.

For Character Search

 

3Turn the [VOL] button to select the character.

4Press the [SELECT] button briefly.

The selected character will be confirmed.

5Repeat steps (3) and (4) to enter all of the characters.

6Press and hold the [SELECT] button.

Playback of the selected music file will begin.