Manual setting of steering wheel switch functions

You can manually assign the desired functions to every steering wheel switch buttons.

Your manual setting may fail due to the ambient environments including the outdoor temperature.

1. Press .

1. Touch .

1. Touch .

• Audio is turned OFF when is touched.

1. Touch .

• Touch to return to the immediately preceding screen.

1. Touch until the Command Select screen is displayed.

• Touch to return to the immediately preceding screen.

1. Touch the command you wish to set.

• Next page is displayed by touching or .

1. While pressing the steering switch button to record, touch the until a beep sounds.

• It will display Completed when the setting is completed, then it will return to Command Select screen and displays Store on the set command.

• “Error, try once again” is displayed when the data reading fails.

• Touch to return to the immediately preceding screen.

1. Assign the desired functions to the steering wheel switch buttons by repeating Steps 6 through 7.

1. Touch .

1. Touch after confirming the final confirmation screen.

• Touch to return to the immediately preceding screen.

If “Error, try once again” is shown on the display, once again select a desired function to set.