Detaching the PND

Using the PND

The navigation function can also be used even if the PND is detached from the main unit.

For details on using PND, refer to the operation manual of the PND.

How to Detach the PND from the Main Unit

• When detaching the PND, take care NOT to touch its rear side.

• After detaching the PND, mount the connector cover to the PND rear side.

• Take care not to attach the PND to this receiver without removing the connector cover from the rear side.

• When attaching the PND, do not press the monitor display.

• If the PND gets wet, do not attach it to the main unit.

1. Press the [Release] button.

• The right-hand side of PND will be unlatched from this receiver.

1. Remove the PND.

• Hold the PND on the right side, lift up and pull it toward you to remove it.

Attaching the PND

1. Latch the left-hand side of PND to this receiver.

• Engage the catch at the left end of the PND with the lock on the main unit.

1. Attach the PND to this receiver.

• Press the right-hand side of PND until it clicks in position.