Saving a Station in Memory
You can save a radio station in memory in the auto or manual mode.
Manual Saving
Select a station you wish to save by Manual tuning or Auto tuning.
Touch the preset switch of station you wish to save until a beep sounds.
The selected station will be saved, and the preset channel number or PS name will be shown on the display.
To manually set additional selected stations for the remaining preset channels, repeat this procedure for each channel.
Six stations can be memorized for each of FM 1, 2 and 3, and six stations can be memorized for AM, making a total of 24 stations.
If the stations have been stored in memory, a station can be selected by touching a preset switch and the station can be received.
Auto Station Memory (ASM)
You can select a station by simply touching a preset switch (any of [1] to [6]). The frequency of the selected station is displayed on the preset switch.
When you save a new station in memory, the existing station is cleared instead.
If you can tune less than six stations, the remaining stations are kept in memory.
Touch
.
Touch
.
The automatic station selection will start with a beep sound. A search will be conducted from the lowest frequency through progressively higher frequencies and stations with strong reception will be memorized for preset registration numbers [1] to [6]. The registration procedure has been completed, a beep sounds twice and the station memorized last (i.e. the one memorized for P6) will continue to be received. Subsequently, when you listen to the radio you will be able to select stations by calling up preset numbers.
To stop ASM, touch
.
