AVN2227P > Names of Controls > Turning the Power ON and OFF
Turning the Power ON and OFF
When the power is turned on, the status in use when the power was last turned off, such as CD and
tuner playback, is restored. If the vehicle has no ACC position on the ignition switch, care is needed
when turning off the main unit. Follow Step 2 or Step 3 when turning off the power.
1.
When the power is OFF, press the [SOURCE/PWR] button.
The power will come ON.
2.
When the power is ON, press the [SOURCE/PWR] button for more than one
second.
All audio sources will be turned OFF.
"GOOD BYE" will be displayed.
"GOOD BYE" will be displayed.
3.
When the power is ON, press the [SOURCE/PWR] button for more than 5
seconds.
The power will go completely OFF.
"ACC OFF" will be displayed.
"ACC OFF" will be displayed.
• When the main unit's power is turned on for the first time or if the battery terminals have been disconnected, e.g. for vehicle maintenance, and the power is then turned back on, the main unit will start up in FM mode. After this, the broadcast stations will be searched for automatically (ASM - Automatic Search Mode) and registered to preset numbers [1] to [6].
• If your vehicle is not equipped with the "ACC" position, press the [SOURCE/PWR] button until "ACC OFF" is displayed.
