Fujitsu Ten ECLIPSE OWNER'S MANUAL / CD3200

• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  
  • About XM satellite radio
  • Selecting the radio mode
  • Selecting a channel
  • Direct channel selection

  • Manually setting channels into memory

  • Preset channel scan
  • Switching displays when using the XM satellite radio
  • Displaying the XM ID
• 
  
• 
  
• 
  
• 
  
• 
  
• 
  

• TOP >
• XM satellite radio >
• Manually setting channels into memory

Manually setting channels into memory

This section covers the storing of stations in the memory of numbered buttons.

Press the [SELECT] (Right/Left) button to tune to the channel to be stored in the memory.

Select any button, from [1] to [6], and press it for more than two seconds.

The tuned channel is now memorized and set in the button selected. Repeat the procedure to set additional manually tuned channels into memory, in turn, for buttons [1] to [6]. These buttons are called the preset buttons.

• If the vehicle’s battery is disconnected (for repairs to the vehicle or when removing the main unit), all channels stored in memory will be lost. In such cases, set the channels into memory again.