Saving Station in Memory
You can save a radio station in memory in the auto or manual mode.
Manual Saving
Select a station you wish to save by Manual tuning or Auto tuning.
Touch and hold the preset switch for at least 1 second.
The selected station will be saved, and the preset channel number and frequency will be shown on the display.
To manually set additional selected stations for the remaining preset channels, repeat this procedure for each channel.
Six stations can be memorized for each of FM 1, 2 and 3, and six stations can be memorized for AM, making a total of 24 stations.
If the stations have been stored in memory, a station can be selected and received by the touching the appropriate preset switch.
Automatic saving
You can select a station by simply touching a preset switch (any of [1] to [6]). The frequency of the selected station is displayed.
When you save a new station in memory, the existing station is cleared to make way for it.
If fewer than six stations can be received, the left over switches retain their original settings.
Touch
for at least one second.
A search will be conducted from the lowest frequency through progressively higher frequencies, and stations with sufficiently strong reception will be memorized for preset registration numbers [1] to [6]. On completion of the registration procedure, a beep sounds once and the station memorized last (i.e. the one memorized for P6) will continue to be received. Subsequently, when you listen to the radio you will be able to select stations by calling up preset numbers.
