Reception of Traffic Information

When the TP is ON, or both of the TP and TA is ON, traffic information can be received as in the following description.

Reception of the Traffic Information when the TP is ON

When the TP is set to ON, “TP” is displayed on the screen. If there is a TP station that can be used within the AF list, it will receive that TP station. If the TP cannot be received, “TP” on the screen will flash. In this case, TP station can be selected by pressing the .

If the reception gets bad after receiving the TP station, it is possible to select a TP station with better reception by pressing the .

If there is no TP station, “NOTHING” is displayed on the screen, and the original FM broadcast is received.

During the selection of the TP station, “TP SEEK” is displayed on the screen.

Reception of the Traffic Information when both the TP and TA are ON

When the AUDIO SOURCE is FM radio

When the TP and TA are set to ON, “TA” is displayed on the screen. If there is a TP station that can be used within the AF list, it will receive that TP station. If TP station cannot be received, “TA” on the screen will flash and automatic TP station search will start. During the selection of the TP station, “TP SEEK” is displayed on the screen.

If there is no TP station, “NOTHING” is displayed on the screen, and original FM broadcast is received.

Once the traffic information starts, the volume of the radio will be muted automatically, and received TA information can be listened to.

When the AUDIO SOURCE is other than FM radio

“TA” is displayed on the screen. If there is a TP station that can be used within the AF list, it will receive that TP station. If TP station cannot be received, “TA” on the screen will flash and automatic TP station selection will start. Once the TA information is received, playback of the current audio will stop, and switch to traffic information automatically. The system will switch to traffic information interrupt mode during the reception of the TA information.

When TA information is received, “TA-INTERRUPT” is displayed, and the system switches to TA station.