AVN2227P > How to Operate the Tuner > Memorizing Stations
Memorizing Stations
Memorizing Stations Manually
1.
Tune into the station to be memorized for the preset channel.
2.
Press the [MODE/PTY] button to select the rotary select mode.
3.
Turn the [VOL] rotary knob to select one of the preset channels P1 to P6.
4.
Press the [ENTER] button until "P
MEMORY" appears on the sub display.
MEMORY" appears on the sub display.
The selected station is memorized and the preset registration number and frequency
are indicated on the display.
To manually set additional selected stations for the remaining preset channels, repeat
this procedure for each channel.
If the stations have been stored in memory, selecting the preset channel with the
[MODE/PTY] button and the [VOL] rotary knob or pressing a switch between [1] and [6]
on the PND display will allow you to tune to that preset station.
Memorizing Stations Manually on the PND Display
1.
Tune into the station to be memorized.
2.
Press the [SCREEN] button and switch the display to the audio screen.
3.
Touch and hold the preset switch where you want to memorize the station until
"PMEMORY" appears on the sub display.
MEMORY" appears on the sub display.
The selected station will be memorized.
To manually set additional selected stations at the remaining preset channels, repeat
this procedure for each channel.
Subsequently, when you listen to the radio you will be able to select stations by
touching the preset switches.
Memorizing Stations Automatically
1.
Press the [FUNC/AF] button to establish the FUNCTION mode.
2.
Press the [FUNC/AF] button until the sub display switches to ASM.
3.
Press the [ENTER] button.
After "ASM ON" is displayed, automatic station selection will start. A search will be
conducted from the lowest frequency through progressively higher frequencies and
stations with strong reception will be memorized for preset registration numbers [1] to
[6].
When the operation has ended the "ASM ON" indication will be cleared and the station
memorized last (i.e. the one memorized for P6) will continue to be received.
Subsequently, when you listen to the radio you will be able to select stations by calling
up preset numbers.
• Pressing the preset switches ([1] to [6]) allows you to make one-touch station selections. The frequency of the selected station is displayed on the preset switch.
• When a new station is set in memory, the station previously set in memory will be deleted.
• If there are fewer than six receivable stations, the stations set in the remaining switches will remain unchanged.
