Connecting (or Disconnecting) the USB Memory
Connect (or disconnect) the USB memory.
This unit supports USB memory in the following formats.
Supported class: Mass storage class
Supported USB Ver.: USB1.0/1.1/2.0 (maximum transfer speed is the same as USB 2.0)
Maximum consumption current: Less than 1.0 A
Supported capacities: 16 MB to 8 GB
Do not connect USB memory devices other than those conforming to the specifications above. There is a possibility that some USB memory devices that do conform to specifications will not function correctly, due to many variables. We suggest testing your USB device prior to departing to your destination.
This unit does not support commercially available USB hubs, multi card readers, external hard disks or portable audio players with USB connectors.
If the USB memory connection cord of this unit is connected to a USB device via an extension cord, it may not function correctly.
If you lose the data in the USB memory while using it with this unit, no compensation will be given for the lost data. It is always a good practice to back up data, and only access a copy for in-vehicle use.
Leaving the USB memory for a long time in a place exposed to direct sunlight may result in deformation or discolouration due to the high temperature, or cause a malfunction. In such cases, ECLIPSE will not give any compensation. When you are not using the USB memory, keep it in a place away from direct sunlight. Further, when leaving the vehicle, do not keep the USB memory inside.
When the audio source is USB, do not disconnect the USB memory. Doing so may damage the data in the USB memory. Before disconnecting the USB memory, turn the ignition switch to the Off position or switch the audio source to a source other than USB, and then disconnect it.
